Chinese Dirt Bike Plastics
Get 2 It Sales stocks Chinese dirt bike plastics, including complete body kits and individual panel replacements for all major Chinese dirt bike and pit bike brands. Whether you need a single cracked fender or a full plastic kit, our catalog is organized by brand and model to ensure mounting point compatibility before your order ships.
Free shipping on orders over $100 to the continental USA.
Plastic body panel fitment on Chinese dirt bikes is model-specific. Fender mounting holes, side panel tab positions, and shroud bolt patterns vary between brands and model years, even on bikes that look identical. Ordering a generic Chinese dirt bike plastic kit without confirming the specific model often results in panels that physically do not align with the mounting points on the frame.
Shop by Brand
We stock plastic kits and individual panels for all major Chinese dirt bike brands:
Filters
Can't find your brand? Contact us with your bike model and year, and we will check availability.
Shop by Part Category
Our Chinese dirt bike plastic kit replacement catalog covers every panel on the bike:
Complete Plastic Kits
A complete plastic kit typically includes front fender, rear fender, left and right shrouds, left and right side panels, and front number plate. Buying a complete kit is the most cost-effective approach when multiple panels are damaged and ensures all pieces match in color and mounting profile.
Front Fenders
Front fenders for Chinese dirt bikes mount to the lower fork legs via two to four bolts depending on the model. Fork leg mounting hole spacing and fender width must match the existing configuration. We list front fenders by brand, model, and displacement.
Rear Fenders
Rear fenders on Chinese dirt bikes mount to the subframe and typically incorporate the seat base or seat mounting tabs into their design. Rear fender fitment is highly model-specific as subframe bolt patterns vary considerably between manufacturers.
Shrouds & Side Panels
Shrouds cover the radiator and frame area on each side. Side panels protect the area behind the shrouds toward the rear of the bike. Both must match the mounting tab positions on the frame for a secure fit. We list these separately for riders replacing individual pieces.
Number Plates & Headlight Shrouds
Front number plates and headlight surround shrouds for Chinese dirt bikes. These are often the first panels damaged in a fall. We stock these as individual replacements rather than requiring a complete kit purchase.
Fitment Guide: Getting the Right Plastics
Confirming the correct plastic kit requires three pieces of information:
- Brand and model name — for example, Apollo DB-X18 or SSR SR125TR; the model name determines the frame geometry and mounting point layout
- Engine size — some brands use the same model name across different displacement machines with different frame designs
- Model year — plastic kit designs for Chinese dirt bikes can change between production years without a model name change; if you have the year, provide it.
If you have the bike in front of you, photograph the existing mounting points for the panel you need — both the frame-side boss and the panel tab position. This lets our team confirm fitment without relying solely on the model name.
Installing Chinese Dirt Bike Plastics: What to Expect
Installing a new plastic kit on a Chinese dirt bike is straightforward in principle but requires attention to a few details that affect the final result. Panels that are not seated correctly at every mounting point will flex, rattle, and crack at the attachment points prematurely.
Test Fitting Before Final Assembly
When a new plastic kit arrives, test-fit every panel before tightening any fasteners. Chinese dirt bike panels are designed to interlock in a specific sequence, and attempting to install them out of order results in panels that do not align at the overlap points. The general sequence is rear subframe components first, then side panels, then shrouds, then front fender. Test-fitting dry lets you identify fitment issues before fasteners are in place.
Fastener Torque and Cracking
Overtightening plastic mounting screws is one of the most common causes of cracking at the mounting tabs on Chinese dirt bike plastics. Plastic fastener bosses require only light torque to hold the panel securely. If a boss is already cracked from the previous installation, a rubber washer under the fastener head distributes the load and prevents the crack from propagating.
Panel Alignment and Tab Engagement
Each panel has interlocking tabs that engage with adjacent panels and the frame. These tabs prevent the panels from flexing away from each other under riding conditions. On Chinese dirt bikes, these tabs are sometimes slightly undersized due to manufacturing tolerance variation, which means the panels may need to be held in position while the fasteners are started.
Color Matching Across a Kit
Complete plastic kits from Get 2 It Sales are supplied as a matched set from a single production run, meaning color consistency across all panels is controlled at the manufacturing level. If you are replacing individual panels rather than a complete kit, color matching depends on how the originals have aged and faded in sunlight. Aged panels may not match the fresh color of a new replacement even when part numbers are identical.
Why Buy From Get 2 It Sales
We stock Chinese dirt bike plastics with fitment confirmed before listing:
- Every incoming shipment is physically inspected before it enters our inventory
- Parts are cataloged by brand and model, not by generic engine size
- Nearly 100 years of combined team experience in Chinese powersports
- Free shipping on orders over $100 to the continental USA
- Dealer program available for repair shops and resellers
- Technical support for part identification
Plastic kits are one of the most frequently returned items in the Chinese powersports market when sourced from generic suppliers. A panel described as fitting a generic Chinese 125cc dirt bike may have been photographed on one model and shipped for another. Our team verifies that the mounting tab positions and bolt hole layouts in our product listings match the panels we actually stock.
Frequently Asked Questions
Will a generic Chinese dirt bike plastic kit fit my bike?
Not reliably. Generic kits are described by engine size rather than by model, and mounting point dimensions vary between manufacturers even on machines with the same displacement. A model-specific kit is the correct approach for a proper fit.
Can I mix and match panels from different brands?
Not typically. Panel mounting points are designed for the specific frame they came with. Panels from a different brand or model will almost certainly have incompatible tab positions, hole spacings, or overall dimensions.
Do your plastic kits come in different colors?
Availability varies by model and brand. Contact us with your model details, and we will advise on color options currently in stock.
My bike is a clone or generic Chinese brand with no clear model name. Can you still help?
Yes. Send us photographs of the existing panels from the front, side, and rear, including any visible mounting tabs and bolt positions. Our team has experience identifying correct plastic kit fitments from photographs for machines with unclear model documentation.
What is your shipping policy?
Free shipping on orders over $100 to the continental USA. Oversized and overweight items are excluded and subject to separate rates. Parts ordered by 1:00 PM EST are shipped the same day.
Can I speak with someone about a specific part?
Yes. Our team is available Monday through Friday, 8:30 AM to 4 PM Eastern. Call us at (864) 595-9930 or reach out through our contact page at get2itparts.com/pages/contact-us.