ATV Chain & Sprocket Kits
Get 2 It Sales stocks complete ATV chain and sprocket kit replacements for Chinese 110cc and 125cc ATVs. Every kit includes the front sprocket, rear sprocket, drive chain, and master link. Chain pitch and sprocket tooth counts are confirmed for each kit listed, so you are not guessing at fitment.
Free shipping on orders over $100 to the continental USA.
Replacing the chain and both sprockets together is the correct approach on any drivetrain service. A new chain fitted to worn sprockets accelerates wear on the new chain and shortens its service life significantly. A worn chain on new sprockets does the same to the sprockets. A matched kit replacement restores full drivetrain performance in a single job.
Shop by Size & Fitment
420-Pitch Chain Kits — Most 110cc Chinese ATVs
The 420 pitch (half-inch link centers) is the standard chain specification on most Chinese 110cc ATVs including TaoTao, Coolster, and Kayo. An ATV chain sprocket kit replacement 110cc from Get 2 It Sales confirms chain pitch, link count, front sprocket tooth count, rear sprocket tooth count, and rear sprocket bolt circle diameter before it ships. These are all measurements that vary between brands and must be matched correctly. In most cases, the chain size is stamped into the chain link and or on the sprocket.
428-Pitch Chain Kits — Some 110cc & Most 125cc ATVs
Some Chinese 110cc ATVs and most 125cc machines use 428-pitch chain. The 428 is slightly wider than the 420, and the two are not interchangeable. If you are unsure which pitch your machine uses, count the links on the existing chain and measure the distance across three consecutive link pins. Both 420 and 428 chains use a 12.7 mm (1/2-inch) pitch, but the 428 chain is wider and uses larger rollers. The two are not interchangeable.
Individual Components
We also stock individual chains, front sprockets, rear sprockets, and master links for riders who need to replace a single worn component. Contact us with your machine's brand and model if you are sourcing components individually rather than a complete kit.
Signs Your Chain & Sprocket Need Replacing
- Chain slack that cannot be adjusted out within the adjuster's range
- Hooked or shark-fin tooth profile on the front or rear sprocket
- Stiff or kinked links that do not flex smoothly over the sprockets
- Rattling or slapping sound from the rear of the ATV under acceleration
- Visible rust or corrosion on the chain links
- Chain has stretched beyond the halfway mark on the adjustment range,and the ATV is used regularly.
On an ATV used regularly off-road, chain and sprocket inspection is recommended every season, with replacement typically due every 1,000 to 2,000 miles depending on riding conditions and lubrication frequency.
Shop by Brand
We stock chain and sprocket kits for all major Chinese ATV brands:
Filters
Sprocket Selection: Understanding Gear Ratios
The front and rear sprocket tooth counts determine your ATV power-to-speed ratio. Understanding how these numbers work lets you make a deliberate choice when replacing worn sprockets rather than simply matching what was there before.
How Sprocket Ratio Affects Performance
The drive ratio is calculated by dividing the rear sprocket tooth count by the front sprocket tooth count. A higher ratio delivers more torque and stronger acceleration at the cost of top speed. Most Chinese 110cc ATVs leave the factory with a ratio optimized for trail riding. If the machine is used primarily for short bursts of acceleration, a slightly larger rear sprocket can improve low-speed acceleration, while a smaller rear sprocket favors higher top speed.
Changing the Ratio
It is possible to change the drive ratio by swapping only one sprocket. However, this is only practical when the existing sprockets show no wear. Fitting a new sprocket of a different tooth count against a worn chain accelerates wear on the new part. If you are changing the ratio at the same time as a full drivetrain service, a complete kit with both sprockets and a new chain at the new ratio is the most cost-effective approach.
Chain Length When Changing Sprocket Size
Changing the rear sprocket tooth count affects the chain length required. A larger rear sprocket needs more chain links; a smaller one needs fewer. When ordering a kit with a non-stock sprocket size, confirm the required chain link count before ordering. Most kit listings specify the correct chain length for the sprocket combination included.
Material Quality
Steel sprockets last longer than aluminum but add more weight. Most Chinese ATV sprockets are mild steel, which is adequate for recreational use. A chain with inconsistent link pitch will wear sprocket teeth unevenly and cause noise before significant mileage has been covered. Our kits are inspected before entering inventory to verify link pitch consistency and correct tooth profiles.
Why Buy From Get 2 It Sales
Our chain and sprocket kits are specified by machine, not by generic size:
- Every incoming shipment is physically inspected before it enters our inventory
- Parts are cataloged by brand and model, not by generic engine size
- Nearly 100 years of combined team experience in Chinese powersports
- Free shipping on orders over $100 to the continental USA
- Dealer program available for repair shops and resellers
- Technical support for part identification
Chain and sprocket kits are a category where generic sourcing causes fitment issues regularly. Rear sprocket bolt circle diameters are not standardized across Chinese ATV brands. A kit listed as a generic 110cc replacement may not fit the specific rear hub on your machine. Our kits are listed with the specifications confirmed for the supported models.
Installation Tips
Replacing the chain and sprockets on a Chinese ATV is a job most owners can complete at home with basic hand tools. The process involves removing the rear wheel to access the rear sprocket, removing the front sprocket cover to reach the front sprocket, and threading the new chain through the swingarm before connecting the master link. Always install the master link clip with the closed end facing the direction of chain travel. Set initial chain slack at 10 to 20mm of vertical movement at the midpoint between sprockets with the ATV on a level surface. Re-check tension after the first few rides as new chains seat slightly during break-in. Apply chain lubricant to the inner link faces after the first ride.
Frequently Asked Questions
How do I know which chain pitch my Chinese ATV uses?
Measure across three consecutive link pins. A 420-pitch chain measures 12.7mm between pin centers. A 428 is the same pitch but with wider link plates. You can also count the link stamps: 420 and 428 are typically stamped on the link side plates of the existing chain.
Should I replace the chain and sprockets at the same time?
Always. A new chain on worn sprockets accelerates chain wear immediately. A worn chain on new sprockets does the same to the sprockets. Replacing all three components together is the only way to get the full service life from a new drivetrain kit.
How often should I lubricate the chain?
Apply chain lubricant every two to three rides, or more frequently in wet or muddy conditions. Apply it to the inner link faces while the chain is warm from riding. Keeping the chain properly lubricated is the single most effective way to extend drivetrain life.
Can I replace just the chain without changing the sprockets?
Only if the sprockets show no visible tooth wear and the ATV has low mileage. If the sprocket teeth have a hooked or irregular profile, a chain-only replacement will wear the new chain prematurely. When in doubt, replace all three.
What is your shipping policy?
Free shipping on orders over $100 to the continental USA. Oversized and overweight items are excluded and subject to separate rates. Parts ordered by 1:00 PM EST are shipped the same day.
Can I speak with someone about a specific part?
Yes. Our team is available Monday through Friday, 8:30 AM to 4 PM Eastern. Call us at (864) 595-9930 or reach out through our contact page at get2itparts.com/pages/contact-us.